The boiler centrifugal induced draft fan is suitable for the ventilation and induced draft fan system of 2～670T/h steam boilers in thermal power plants. When there is no other special requirements, Y6-41 can also be used for mine ventilation and general ventilation. The medium conveyed by the ventilator is air, and the maximum temperature shall not exceed 80oC, and the medium conveyed by the induced draft fan is flue gas, and the maximum temperature shall not exceed 250oC. A removal device must be installed before the induced draft fan. According to general power plant usage, the dust removal efficiency shall not be less than 85%.
Second, the use conditions of the fan
1. Application place: As a general factory and indoor ventilation.
2. Transport gas: air and other gases that are not spontaneously combustible, harmless to humans, and non-corrosive to steel materials.
3. Gas status: It is strictly forbidden to contain viscous substances in the gas, and the dust and other solid impurities shall not exceed 110mg/m3.
4. Operating environment: The altitude does not exceed 1000m, and the ambient temperature does not exceed 80°C.
The Y6-41 boiler centrifugal induced draft fan is the induced draft fan of various industrial boilers with an evaporation capacity of 0.5-10t/h. There are two types of left-handed and right-handed, both of which are single suction, and the air outlet position "left" or "right" can be made Four angles: 0°, 90°, 180°, 270°. This product can be used with industrial furnaces.
There are two transmission modes of the fan: C and D. Adjustable doors, bases and damping pads can be prepared according to user needs.